U11C3: Multi-Manufacturer: U11C3 (Chrysler Infotainment)

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (U11C3) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Network communication codes (U-codes) are particularly manufacturer-specific and may require specialized diagnostic tools. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

U11C3
Network Communication Code

Multi-Manufacturer: U11C3 (Chrysler Infotainment)

Network CommunicationsHIGH👁 Views: 47

Description

U11C3 appears in Chrysler vehicles with blank touch screen, dead HVAC controls, and U0101. May be undocumented - check TSB 08-033-15.

Common Symptoms

  • FOR CHRYSLER: 8.4" touch screen blank and non-responsive
  • HVAC controls dead (AC defaults to defrost)
  • Radio still plays via steering wheel controls
  • Voice recognition still works
  • Backup camera inoperative
  • Accompanied by U0101 - Lost Communication with TCM

Possible Causes

  • FOR CHRYSLER: Software glitch in UConnect system
  • Communication loss between modules
  • TSB 08-033-15 REV. B addresses blank screen issues
  • Possible CAN bus communication failure
  • Faulty HVAC/radio control module

Diagnosis Steps

  1. IDENTIFY MANUFACTURER FIRST - U11C3 documented in Chrysler 300 forum cases
  2. Check for TSB 08-033-15 REV. B which addresses blank screen conditions
  3. Try UConnect firmware update from official website
  4. Note that U11C3 may show as blank in scanner - possibly undocumented
  5. Check for related codes especially U0101
  6. Inspect dimmer switch near headlamp controls (forum suggests possible connection)

Repair Solutions

  • FOR CHRYSLER: Update UConnect firmware per TSB 08-033-15 REV. B
  • Check and clean fog lamp connections (forum reported B16F7 for missing fog light)
  • Pull battery for extended period (overnight) - though forum user reported presets retained
  • Professional diagnosis may require dealer-level scan tools
  • Replace faulty HVAC/radio module if confirmed

Prevention Tips

  • U11C3 often appears with U0101 in infotainment failures
  • Check for TSB updates before replacing expensive modules
  • Forum data suggests this may be related to broader CAN bus issues
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.

Try DTC Remover — Free →