U1171: Invalid/Missing Cellular Phone / Paging System Data

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (U1171) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Network communication codes (U-codes) are particularly manufacturer-specific and may require specialized diagnostic tools. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

U1171
Network Communication Code

Invalid/Missing Cellular Phone / Paging System Data

Network CommunicationsMEDIUM👁 Views: 16

Description

SCP (J1850) Invalid or Missing Data for Cellular Phone / Paging System - variant code. Check telematics module and network communication.

Common Symptoms

  • Loss of hands-free phone operation [citation:2]
  • Inability to use in-car paging or telematics services [citation:2]
  • Warning lights or messages related to phone/telematics system [citation:2]
  • Possible malfunction indicator lamp (MIL) or check engine light (rare) [citation:2]
  • Loss of vehicle tracking/emergency call functionality (if equipped) [citation:2]

Possible Causes

  • Faulty or disconnected cellular phone/paging module [citation:2]
  • Damaged or corroded connectors at module or network junctions [citation:2]
  • Wiring issues (open, shorted, or intermittent connections in SCP/J1850 bus wiring) [citation:2]
  • Software or firmware mismatch after update or module replacement [citation:2]
  • Power or ground supply issues to cellular/paging module [citation:2]
  • Faulty communication bus (SCP/J1850) or interfering modules [citation:2]

Diagnosis Steps

  1. IDENTIFY MANUFACTURER FIRST - Ford, Lincoln, or Mercury vehicles [citation:2].
  2. Check for other stored DTCs and scan all modules for related or network communication codes [citation:2].
  3. Perform visual inspection of wiring and connectors at cellular phone/paging module and along SCP/J1850 bus [citation:2].
  4. Check power and ground using digital multimeter [citation:2].
  5. Perform network integrity test with OEM scan tool to check for bus communication errors [citation:2].
  6. Module self-test if available via scan tool [citation:2].
  7. Wiggle and stress test harnesses while monitoring data to spot intermittent faults [citation:2].
  8. Substitute with known-good module if available [citation:2].
  9. Consult OEM service information for model-specific guidance [citation:2].

Repair Solutions

  • Reconnect or replace failed cellular phone/paging module [citation:2]
  • Clean or repair corroded/damaged connectors and terminals [citation:2]
  • Repair or replace damaged SCP/J1850 wiring [citation:2]
  • Update or reprogram module software with latest OEM calibration [citation:2]
  • Correct power or ground supply problems at module [citation:2]
  • Replace faulty modules on communication bus if interfering with network messages [citation:2]

Prevention Tips

  • Always check fuses, power, and ground first [citation:2]
  • Do not assume module is faulty without checking wiring and connectors [citation:2]
  • Check for software updates or TSBs that may resolve communication errors [citation:2]
  • Use OEM-grade scan tool for network testing [citation:2]
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.

Try DTC Remover — Free →