U119B: Lost Communication - Ambient Temperature
Complete diagnostic information, symptoms, and potential causes
Manufacturer-Specific Variations
This code (U119B) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Network communication codes (U-codes) are particularly manufacturer-specific and may require specialized diagnostic tools. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.
Lost Communication - Ambient Temperature
Description
Lost communication with ambient temperature sensor. Message (0x2CA) not received from instrument cluster (KOMBI) by DME.
Common Symptoms
- Check Engine Light may illuminate (US models)
- Instrument cluster may be blank or behave erratically
- Clock may reset to midnight
- EV/hybrid functions may be limited (on hybrid models)
- Multiple U-codes often appear together
Possible Causes
- Fault with transmitting control module (KOMBI/instrument cluster)
- Weak or failed auxiliary battery (common on F30 330e)
- Low main battery voltage
- CAN bus communication issue
- Intermittent wiring problem
- Infotainment system glitch (iD8)
Diagnosis Steps
- IDENTIFY MANUFACTURER FIRST - BMW/MINI specific code
- In BMW diagnostics, this appears as code CDB204
- Check battery voltage and condition - both main and auxiliary
- Verify Terminal 15 ON and voltage >10V condition
- For F30 330e, check auxiliary battery - common failure point
- For newer models with iD8, try resetting entertainment system (hold power button 30 sec)
- Inspect CAN bus wiring between KOMBI and DME
- If no wiring issues, suspect KOMBI module failure
Repair Solutions
- Replace weak auxiliary battery (common fix for F30 330e)
- Disconnect main battery for 5-10 minutes to reset systems
- Repair CAN bus wiring if damaged
- Replace KOMBI/instrument cluster if transmitting fault confirmed
Prevention Tips
- This code often appears with multiple U-codes - check battery first
- Auxiliary battery on hybrids has limited lifespan (5-7 years)
- US models show Check Engine Light, European models typically do not
Working with ECU firmware? Remove DTCs directly from firmware files
Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.