U1173: Invalid/Missing Remote Button Control Data
Complete diagnostic information, symptoms, and potential causes
Manufacturer-Specific Variations
This code (U1173) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Network communication codes (U-codes) are particularly manufacturer-specific and may require specialized diagnostic tools. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.
Invalid/Missing Remote Button Control Data
Description
SCP (J1850) Invalid or Missing Data for Remote Button Control - variant code. Check remote module and network communication.
Common Symptoms
- Remote key fob not locking or unlocking doors [citation:4]
- Steering wheel audio or cruise control buttons unresponsive [citation:4]
- Warning lights for keyless entry or security systems [citation:4]
- Intermittent or complete loss of remote-related functions [citation:4]
- No response from trunk/hatch release on remote [citation:4]
Possible Causes
- Faulty Remote Button Control Module (module may have failed or sending corrupted data) [citation:4]
- Wiring or connector issues (damaged, corroded, or loose wiring/connectors) [citation:4]
- SCP (J1850) network problems (short circuits, open circuits, interference) [citation:4]
- Software glitch (outdated or corrupted software in connected modules) [citation:4]
- Low battery voltage (weak or unstable battery voltage disrupting communication) [citation:4]
Diagnosis Steps
- IDENTIFY MANUFACTURER FIRST - Ford, Lincoln, or Mercury vehicles [citation:4].
- Scan for additional codes using professional scan tool to check for related U-codes or B-codes [citation:4].
- Check remote button operation on fob and inside vehicle (steering wheel, trunk release) [citation:4].
- Inspect wiring and connectors for pinched, corroded, or disconnected wiring at Remote Button Control and along SCP network [citation:4].
- Test Remote Button Control Module using multimeter and scan tool to verify power, ground, and data signal [citation:4].
- Check battery and charging system - low voltage can corrupt module data [citation:4].
- If all hardware checks out, look for available OEM software updates for affected modules [citation:4].
Repair Solutions
- Replace faulty Remote Button Control Module [citation:4]
- Repair or replace damaged wiring/connectors on SCP (J1850) network [citation:4]
- Clean and secure all module connectors [citation:4]
- Update or reflash module software to latest OEM version [citation:4]
- Replace or recharge weak battery; repair charging system as needed [citation:4]
Prevention Tips
- Do not replace module without checking wiring and power/ground first [citation:4]
- Always scan for additional codes to reveal underlying network faults [citation:4]
- Do not ignore battery voltage - weak batteries cause communication glitches [citation:4]
Working with ECU firmware? Remove DTCs directly from firmware files
Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.