U1197: Invalid/Missing Door Lock Data

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (U1197) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Network communication codes (U-codes) are particularly manufacturer-specific and may require specialized diagnostic tools. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

U1197
Network Communication Code

Invalid/Missing Door Lock Data

Network CommunicationsMEDIUM👁 Views: 63

Description

SCP (J1850) Invalid or Missing Data for Door Locks - variant code. Check door lock module and wiring.

Common Symptoms

  • Intermittent power door locks
  • Remote lock/unlock failures
  • Door ajar warning light issues

Possible Causes

  • Faulty wiring/connectors in door lock circuit
  • Failing door lock control module
  • Network communication faults
  • Low system voltage

Diagnosis Steps

  1. IDENTIFY MANUFACTURER FIRST - Similar to U1196 vehicles.
  2. Verify code with scan tool.
  3. Inspect door harness and connectors.
  4. Check battery voltage.
  5. Test SCP bus lines for continuity.

Repair Solutions

  • Repair damaged wiring
  • Replace door lock module
  • Clean corroded connectors
  • Replace weak battery

Prevention Tips

  • Check door harness wiring first
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, Delphi CRD1.xx DCM3.2, Delphi CRD2.xx DCM3.5, Delphi CRD3.xx, SID3xx (307, 310), EDC16 (C3, C36, CP33, C41, CP42), EDC17 (C42, C11, CP19, C84), MD1CS006, SID3xx (301, 305, 307, 309, 310), SID202-SID206, SID209-SID211, EDC17 (C10, CP65, C70), Delphi DCM 3.5, Delphi DCM 6.x, Siemens/Continental EMS22xx, Siemens/Continental EMS24xx (test), Siemens SIM210 (test), Siemens SIM28/29 (test), EDC16 (C39, CP34), DCM3.2, Siemens SIM2K, Siemens SID20x, MED17 (9.9, 9.7, 2, 8.31, 8.32)). Free: 3 removals/day.

Try DTC Remover — Free →