P3164: Linear Oxygen sensor exhaust bank 4, compensation wire pump current, open circuit

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (P3164) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P3164
Powertrain Code

Linear Oxygen sensor exhaust bank 4, compensation wire pump current, open circuit

Emission SystemHIGH👁 Views: 91

Description

Linear Oxygen sensor exhaust bank 4, compensation wire pump current, open circuit

Common Symptoms

  • Check Engine Light
  • Possible wideband oxygen sensor issues bank 4
  • Emission system warnings
  • Fuel management problems

Possible Causes

  • Open circuit in bank 4 linear oxygen sensor compensation wire pump current circuit
  • Wiring breaks
  • Sensor internal faults
  • Connector issues
  • Circuit protection problems

Diagnosis Steps

  1. Test bank 4 linear oxygen sensor compensation wire pump current circuit
  2. Check for open circuits in wiring
  3. Test sensor internal pump circuit
  4. Inspect electrical connections
  5. Monitor sensor pump current

Repair Solutions

  • Repair open circuit in bank 4 linear oxygen sensor wiring
  • Replace faulty wideband oxygen sensor
  • Fix connector or connection issues
  • Address circuit protection problems

Prevention Tips

  • Regular emission system maintenance
  • Protect sensor wiring from damage
  • Address wideband sensor warnings promptly
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, Delphi CRD1.xx DCM3.2, Delphi CRD2.xx DCM3.5, Delphi CRD3.xx, SID3xx (307, 310), EDC16 (C3, C36, CP33, C41, CP42), EDC17 (C42, C11, CP19, C84), MD1CS006, SID3xx (301, 305, 307, 309, 310), SID202-SID206, SID209-SID211, EDC17 (C10, CP65, C70), Delphi DCM 3.5, Delphi DCM 6.x, Siemens/Continental EMS22xx, Siemens/Continental EMS24xx (test), Siemens SIM210 (test), Siemens SIM28/29 (test), EDC16 (C39, CP34), DCM3.2, DCM6.x (test), Siemens SIM2K, Siemens SID20x, MED17 (9.9, 9.7, 2, 8.31, 8.32)). Free: 3 removals/day.

Try DTC Remover — Free →