P11D3: Camshaft position (CMP) actuator, exhaust A, cylinder 1 - range/performance problem
Complete diagnostic information, symptoms, and potential causes
Manufacturer-Specific Variations
This code (P11D3) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.
Camshaft position (CMP) actuator, exhaust A, cylinder 1 - range/performance problem
Description
Camshaft position (CMP) actuator, exhaust A, cylinder 1 - range/performance problem
Common Symptoms
- Check Engine Light
- Possible exhaust timing issues
- Reduced engine efficiency
- Exhaust VVT performance warnings for cylinder 1
Possible Causes
- Range or performance problem with exhaust camshaft position actuator A for cylinder 1
- Mechanical binding in exhaust actuator
- Oil flow issues to exhaust actuator
- Exhaust actuator solenoid performance degradation
- Exhaust VVT control system problems
Diagnosis Steps
- Test exhaust camshaft position actuator A performance for cylinder 1
- Check exhaust actuator movement and response
- Test oil flow to exhaust VVT system
- Monitor exhaust actuator control signals
- Compare with other cylinders
Repair Solutions
- Replace faulty exhaust camshaft position actuator A for cylinder 1
- Address mechanical binding issues in exhaust system
- Fix oil flow problems to exhaust VVT system
- Repair exhaust VVT control system issues
Prevention Tips
- Regular oil changes with correct viscosity
- Maintain proper engine oil pressure
- Address exhaust VVT system warnings early
Working with ECU firmware? Remove DTCs directly from firmware files
Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, Delphi CRD1.xx DCM3.2, Delphi CRD2.xx DCM3.5, Delphi CRD3.xx, SID3xx (307, 310), EDC16 (C3, C36, CP33, C41, CP42), EDC17 (C42, C11, CP19, C84), MD1CS006, SID3xx (301, 305, 307, 309, 310), SID202-SID206, SID209-SID211, EDC17 (C10, CP65, C70), Delphi DCM 3.5, Delphi DCM 6.x, Siemens/Continental EMS22xx, Siemens/Continental EMS24xx (test), Siemens SIM210 (test), Siemens SIM28/29 (test), EDC16 (C39, CP34), DCM3.2, Siemens SIM2K, Siemens SID20x, MED17 (9.9, 9.7, 2, 8.31, 8.32)). Free: 3 removals/day.