P1143: Load Calculation Cross Check, Upper Limit Exceeded
Complete diagnostic information, symptoms, and potential causes
Manufacturer-Specific Variations
This code (P1143) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.
Load Calculation Cross Check, Upper Limit Exceeded
Description
Load Calculation Cross Check, Upper Limit Exceeded
Common Symptoms
- Check Engine Light
- Possible performance limitations
- Engine load calculation warnings
- Upper limit threshold violations
Possible Causes
- Load calculation above expected upper limit
- Faulty MAF sensor reading too high
- Restricted air intake causing high load readings
- Throttle position sensor issues
- Boost pressure sensor problems (if turbocharged)
Diagnosis Steps
- Check MAF sensor readings at different RPMs
- Inspect air intake for restrictions
- Test throttle position sensor operation
- Check boost pressure sensor if applicable
- Monitor engine load parameters
Repair Solutions
- Clean or replace MAF sensor
- Remove air intake restrictions
- Fix throttle position sensor issues
- Address boost pressure sensor problems
- Update ECU calibration
Prevention Tips
- Regular air intake system maintenance
- Monitor MAF sensor performance
- Replace air filter as scheduled
Working with ECU firmware? Remove DTCs directly from firmware files
Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.