P0706: Transmission Range Sensor (F125), Implausible Signal

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (P0706) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P0706
Powertrain Code

Transmission Range Sensor (F125), Implausible Signal

Transmission SystemHIGH👁 Views: 43

Description

Transmission Range Sensor (F125), Implausible Signal

Common Symptoms

  • Check Engine Light for transmission range sensor implausible signal
  • Conflicting gear position indications
  • Incorrect gear selection behavior
  • Erratic transmission operation
  • Gear position warning messages
  • Transmission safety system activation

Possible Causes

  • Sensor signal conflicts with other transmission inputs
  • Wiring issues causing signal corruption
  • Sensor calibration problems
  • Mechanical issues affecting sensor readings
  • Signal processing errors in TCM
  • Multiple gear position signals detected

Diagnosis Steps

  1. Check transmission range sensor signal consistency
  2. Compare sensor readings with actual gear position
  3. Test wiring for signal integrity
  4. Verify sensor calibration
  5. Check for mechanical transmission issues
  6. Test TCM signal processing

Repair Solutions

  • Identify and resolve signal conflicts
  • Repair wiring issues affecting signal quality
  • Recalibrate or replace transmission range sensor
  • Address mechanical transmission problems
  • Fix TCM signal processing issues
  • Ensure single clear gear position signal

Prevention Tips

  • Regular transmission system checks
  • Address gear position inconsistencies promptly
  • Keep transmission sensors properly calibrated
  • Protect transmission wiring from damage
  • Maintain proper mechanical linkage
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.

Try DTC Remover — Free →