P05DE: Brake Pedal Position Sensor B Circuit High

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (P05DE) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P05DE
Powertrain Code

Brake Pedal Position Sensor B Circuit High

Brake SystemHIGH👁 Views: 54

Description

Brake Pedal Position Sensor B Circuit High

Common Symptoms

  • Check Engine Light for brake pedal position sensor B circuit high
  • Abnormally high secondary brake pedal position readings
  • Backup brake lights staying on
  • Redundant cruise control thinking brakes are applied
  • Secondary electronic brake control errors
  • Sensor B signal voltage above specification

Possible Causes

  • Faulty brake pedal position sensor B with excessive output
  • Short circuit in sensor B wiring
  • Sensor B calibration drift to high range
  • Electrical interference causing high B readings
  • Signal conditioning circuit overload for B
  • ECU input B protection failure

Diagnosis Steps

  1. Measure brake pedal position sensor B output voltage
  2. Check for short circuits in sensor B wiring
  3. Test sensor B calibration
  4. Monitor for electrical interference
  5. Check signal conditioning circuit for B
  6. Verify ECU input B protection

Repair Solutions

  • Replace faulty brake pedal position sensor B
  • Repair short circuits in sensor B wiring
  • Recalibrate or replace sensor B
  • Shield B circuit from interference
  • Fix signal conditioning issues for B
  • Address ECU protection problems for B

Prevention Tips

  • Regular secondary brake pedal signal voltage monitoring
  • Protect sensor B wiring from shorts
  • Address high backup signal issues promptly
  • Keep sensor B properly calibrated
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.

Try DTC Remover — Free →