P04EA: EVAP System Small Leak Detected – Fuel Tank Side

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (P04EA) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P04EA
Powertrain Code

EVAP System Small Leak Detected – Fuel Tank Side

Emission ControlMODERATE👁 Views: 57

Description

EVAP system small leak detected - fuel tank side

Common Symptoms

  • Check Engine Light for EVAP system small leak detected – fuel tank side
  • EVAP system small leak detection on fuel tank side
  • Fuel system vapor containment small leak issues
  • Emission control small leak monitoring fuel tank side failures
  • Engine management EVAP integrity small leak detection
  • Failed EVAP small leak fuel tank side diagnostics

Possible Causes

  • Small leak in fuel tank or associated components
  • Loose or damaged fuel tank fittings or connections
  • Fuel tank vent valve small leak
  • Fuel filler neck or cap small leak
  • EVAP system hose or pipe small leak on tank side
  • Fuel tank pressure sensor detecting small pressure loss

Diagnosis Steps

  1. Perform EVAP system leak test for small leaks
  2. Inspect fuel tank and components for small leaks
  3. Check fuel tank fittings and connections
  4. Test fuel tank vent valve for small leaks
  5. Inspect fuel filler neck and cap
  6. Check EVAP system hoses and pipes on tank side

Repair Solutions

  • Repair identified small leak in fuel tank components
  • Tighten or replace loose/damaged fuel tank fittings
  • Replace leaking fuel tank vent valve
  • Fix fuel filler neck or cap leaks
  • Repair EVAP system hose or pipe small leaks
  • Reset EVAP leak detection system

Prevention Tips

  • Regular EVAP system leak detection monitoring
  • Maintain fuel tank component integrity
  • Address small vapor leaks promptly
  • Perform regular fuel system inspections
⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.

Try DTC Remover — Free →