What are the symptoms of P023B?

Check Engine Light with charge air cooler coolant pump control signal too low; Coolant pump control system low signal condition; Intercooler cooling efficiency and performance issues; Pump operation problems and reduced effectiveness; Temperature control limitations for charge air; System performance concerns and reliability issues

Short to ground in coolant pump control circuit; Failed intercooler coolant pump or control components; Corroded or damaged pump control connections; ECU reference voltage issues for pump control; Pump control calibration or mechanical issues; Wiring harness issues causing low signal

Repair shorted pump control wiring to ground; Replace faulty intercooler coolant pump or controls; Clean or replace corroded pump control connections; Fix ECU reference voltage issues if present; Recalibrate or adjust pump control system; Reset cooling system adaptations

Do OBD-II codes differ between vehicle manufacturers?

Yes, while P-codes (powertrain) follow SAE J2012 standards, manufacturers may implement additional parameters or variations. U-codes (network communication) are particularly manufacturer-specific and can have different meanings for different brands.

Should I always check my vehicle's service manual?

Absolutely. Your vehicle's official service manual provides manufacturer-specific interpretations, diagnostic procedures, and repair instructions tailored to your exact model. Generic OBD-II code databases provide general guidance, but factory documentation ensures accurate diagnosis.

Complete diagnostic information for error code P023B

⚠️

Manufacturer-Specific Variations

This code (P023B) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P023B

Powertrain Code

Charge Air Cooler Coolant Pump Control, Signal too Low

Cooling SystemMODERATE👁 Views: 56

Description

Charge air cooler coolant pump control, signal too low

Common Symptoms

Check Engine Light with charge air cooler coolant pump control signal too low
Coolant pump control system low signal condition
Intercooler cooling efficiency and performance issues
Pump operation problems and reduced effectiveness
Temperature control limitations for charge air
System performance concerns and reliability issues

Possible Causes

Short to ground in coolant pump control circuit
Failed intercooler coolant pump or control components
Corroded or damaged pump control connections
ECU reference voltage issues for pump control
Pump control calibration or mechanical issues
Wiring harness issues causing low signal

Diagnosis Steps

Check coolant pump control signal voltage
Test for shorts to ground in pump control circuit
Measure pump control system resistance values
Inspect pump control connections for corrosion or damage
Verify ECU reference voltage for pump control system
Test pump mechanical operation and current draw

Repair Solutions

Repair shorted pump control wiring to ground
Replace faulty intercooler coolant pump or controls
Clean or replace corroded pump control connections
Fix ECU reference voltage issues if present
Recalibrate or adjust pump control system
Reset cooling system adaptations

Prevention Tips

Protect coolant pump control wiring from moisture
Regular cooling system electrical connection checks
Address abnormal low control signals immediately

⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW/MINI (EDC16, EDC17, MEVD17) and VAG Group (EDC17). Free: 3 removals/day.

Try DTC Remover — Free →

← Back to OBD Codes List Home