What are the symptoms of P0113?

Check Engine Light; Abnormally high intake air temperature readings; Possible insufficient hot air compensation by ECU; Fuel mixture issues in hot conditions; Hot weather performance problems

Short to power in IAT sensor circuit; Failed IAT sensor; Open circuit or high resistance in sensor system; ECU signal processing fault; Sensor calibration error

Repair shorted sensor wiring to power; Replace faulty intake air temperature sensor; Repair open circuits or high resistance issues; Update ECU software if processing faulty; Reset temperature system adaptations

Do OBD-II codes differ between vehicle manufacturers?

Yes, while P-codes (powertrain) follow SAE J2012 standards, manufacturers may implement additional parameters or variations. U-codes (network communication) are particularly manufacturer-specific and can have different meanings for different brands.

Should I always check my vehicle's service manual?

Absolutely. Your vehicle's official service manual provides manufacturer-specific interpretations, diagnostic procedures, and repair instructions tailored to your exact model. Generic OBD-II code databases provide general guidance, but factory documentation ensures accurate diagnosis.

P0113: Intake Air Temperature Sensor 1 Signal too High

Complete diagnostic information, symptoms, and potential causes

⚠️

Manufacturer-Specific Variations

This code (P0113) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.

P0113

Powertrain Code

Intake Air Temperature Sensor 1 Signal too High

Air Intake SystemMODERATE👁 Views: 43

Description

Intake Air Temperature (IAT) Sensor-1 (G42), Signal too High

Common Symptoms

Check Engine Light
Abnormally high intake air temperature readings
Possible insufficient hot air compensation by ECU
Fuel mixture issues in hot conditions
Hot weather performance problems

Possible Causes

Short to power in IAT sensor circuit
Failed IAT sensor
Open circuit or high resistance in sensor system
ECU signal processing fault
Sensor calibration error

Diagnosis Steps

Check IAT sensor signal voltage
Test for shorts to power in sensor circuit
Measure sensor resistance and circuit continuity
Inspect for open circuits or high resistance
Verify ECU signal processing

Repair Solutions

Repair shorted sensor wiring to power
Replace faulty intake air temperature sensor
Repair open circuits or high resistance issues
Update ECU software if processing faulty
Reset temperature system adaptations

Prevention Tips

Protect temperature sensor wiring from damage
Regular circuit continuity checks
Address abnormal high temperature readings promptly

⚡

Working with ECU firmware? Remove DTCs directly from firmware files

Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, SID3xx (307, 310), SID3xx (301, 305, 307, 309, 310), SID202-SID206, SID209-SID211). Free: 3 removals/day.

Try DTC Remover — Free →

← Back to OBD Codes List Home