P004D: Turbocharger Boost Control B Signal too High
Complete diagnostic information, symptoms, and potential causes
Manufacturer-Specific Variations
This code (P004D) may have different meanings or additional parameters depending on your vehicle's make, model, and year. Always verify with your vehicle's service manual or a qualified technician before attempting repairs.
Turbocharger Boost Control B Signal too High
Description
Turbocharger / Supercharger Boost Control 'B', Signal too High
Common Symptoms
- Secondary turbo control issues
- Check Engine Light
- Erratic secondary boost pressure
- Possible secondary turbo overspeed protection
- Reduced twin-turbo efficiency
Possible Causes
- Short to power in secondary boost control circuit
- Failed secondary boost control solenoid stuck on
- ECU secondary driver circuit malfunction
- Secondary wiring harness short to 12V
- Aftermarket secondary controller interference
Diagnosis Steps
- Test secondary boost circuit for shorts to power
- Check secondary boost control solenoid operation
- Inspect secondary wiring harness for damage
- Compare ECU outputs for both boost systems
- Check for secondary aftermarket controllers
Repair Solutions
- Repair shorted secondary boost wiring
- Replace faulty secondary boost solenoid
- Remove interfering secondary aftermarket components
- Replace ECU if secondary driver failed
- Reset secondary boost adaptations
Prevention Tips
- Professional twin-turbo performance upgrades
- Regular secondary turbo wiring inspections
- Avoid splicing into secondary boost wiring
Working with ECU firmware? Remove DTCs directly from firmware files
Our free Firmware DTC Remover detects and removes hardcoded fault codes directly from ECU firmware files — no software needed. Supports BMW / MINI, VAG (VW, Audi, Porsche, Skoda, Seat, Cupra), PSA (Peugeot, Citroën, DS), Mercedes-Benz, Renault / Dacia / Samsung, Ford, Kia / Hyundai, Land Rover / Jaguar (EDC16, EDC17, MD1, MEVD17, MSV/MSD (7X/8X/9X), MS45, DCM3.7, DCM6.x, PCR2.1, DCM3.4, SID201, SID208, SID803/803A, CRD1.xx, CRD2.xx, CRD3.xx, SID3xx, SID202-SID206, SID209-SID211, DCM3.5, EMS22xx, EMS24xx (test), SIM210 (test), SIM28/29 (test), DCM3.2, SIM2K, SID20x, MED17). Free: 3 removals/day.